BALCONIES AND LOGGIA
WINDOWS IN APARTMENTS AND HOUSES
WINDOWS OF ROOF
Maintaining of the stable temperature in the room. Both heating and cooling equipment with capacity up to 3 kW (16 A, 220 V) can be connected to this thermostatic switch. Depending on the temperature set by the user (in the range from 0 to 30°C) the thermostatic switch automatically turns on or off the load maintaining the required temperature in the room with a deviation of no more than 1°C.
Simple operation and setup. The thermostatic switch is equipped with a three-digit digital display indicating the preset temperature to maintain. Using the display you can easily set up the thermostatic switch, open the necessary information from the menu and get the information about any device malfunction.
Possibility of load switching delay. In the thermostatic switch you can adjust load delay, thus delaying the supply of voltage to the load for a certain time.
Protection against frequent alarm activations. The thermostatic switch has protection against frequent activations of the power relay to increase its service life. If timing between relay switching is less than one minute, the thermostatic switch will delay the relay activation indicating the countdown of the time with a flashing dot in rightmost digit.
Protection from children. There is a possibility of blocking the buttons from children or accidental pressing.
Protection against internal overheating. If the temperature inside the casing exceeds 80°C an emergency shutdown of the load will occur. The indicator will display a corresponding notification until the temperature inside the casing drops below 60°C and one of the buttons is pressed to unlock the thermostatic switch.
Load Timer. The thermostatic switch collects data on the operating time of the load in hours. It is possible to reset the counter. Non-volatile memory settings. In case of blockout all settings are saved in the device’s memory; when the power is restored no need to reconfigure again.
Adjustment range is from 0 to 30°С
Maximum load current is 16 A
Maximum power load is 3 kW
Power supply is 230 V ± 10%
NTC temperature sensor (10 kΩ thermistor at 25°C)
Temperature hysteresis is 1°С
Sensor connection cable length is 0.1 m
Protection degree is IP20
Product overall dimensions are 124 x 57 x 83 mm
Product weight is 0.19 kg